Research shows 53% of people would not know how to spot a dodgy fire door
The Grenfell Tower disaster has been a tragic wake-up call. We have seen how destructive fires can be and how much devastation they can cause in a short amount of time. It’s high time we recognize the importance of fire doors and the crucial role they play in restricting the spread of fire and smoke.
According to a survey of more than 1,000 tenants living in flats by Atomik Research, 58 percent of all tenants do not know who the ‘responsible person’ is for ensuring their buildings are fire safe. Even worse is that 53 percent of people would not know how to spot a dodgy fire door, according to research shared by the Chief Fire Officers Association (CFOA) in September 2016.
To mark this year’s FDSW at the end of September, here are 10 recommended checks for common problems with fire doors.
As news emerged that more than 1,000 fire doors were missing from Camden tower blocks in the wake of Grenfell Tower’s fire, the most important check is making sure that an assumed fire door is actually an authentic fire door.
All fire doors display certificates and relevant markings to verify their fire integrity. Check for a label or a plug on top or on the side of each door for a fire-resistance rating. If there isn’t one, it is most likely not a fire door and will not protect you in a fire.
Gaps around the fire door should be 3mm or less to stop smoke and fire from getting through. To check, try slipping an old £1 coin between the fire door and the frame, which is about 3mm in thickness.
3. Door Handles and Panic Bars
Door handles and panic bars should be easy to use. If they do jam or grind, then it means they need cleaning.
In a fire, it goes without saying that you should be able to escape quickly and easily.
On fire doors, there must be a minimum of three hinges, and all screws must be tight. Check that the hinges are free of metal fragments and oil leakage, as this could be a sign of dangerous wear and tear.
5. Locks and Latches
Close your fire door and shake it back and forth to see if it is loose or rattles. If it does, then there’s a problem.
Fire doors should not rattle and should be fully engaged with the strike plates. If they do not latch, then dangerous toxic chemicals and smoke will escape around the door and cause visibility and breathing problems.
6. Manual Door Closers
Fire doors need door closers, and those door closers need to be fitted and set correctly to help fire doors fully close to the frame.
Check the door closers by opening and releasing the fire door. If the door does not close, then the door closer could be the problem and needs adjusting. Classic signs of door closer malfunctions include wear and tear, oil leakages and metal fragments.
7. Hold-Open Devices
Fire doors should never be propped open by objects. Doing so is illegal; however, they can be held open legally with electromagnetic devices.
These devices run on electricity and are linked to the fire alarm system in the building. When the fire alarm sounds, make sure the doors release immediately and close fully into the frame.
By law, all fire doors must have proper signage, so users know they should be kept shut.
9. Panic Exit Devices
Exit devices, such as panic bars, must be in working order and give users immediate exit.
Try conducting a practice fire evacuation drill and running through the panic exit. If it takes you longer than 10 seconds to get through the door, then the panic exit needs to be looked at and possibly replaced or repaired.
10. Door Seals
Fire doors must be fitted with intumescent seals to stop smoke from getting through the fire doors.
The first check is that they are not missing from the fire door. Secondly, they must be in good condition. Check also that the seals are well-attached inside the groove in the frame.
Fire doors play a crucial role in restricting the spread of fire and smoke. If you have any questions or are unsure about how to check your fire doors, please consult an Allegion expert on 0121 380 2400, or visit Allegion’s Fire Door Safety website at http://www.allegion.com/uk/fitbritonandstaysafe.
Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA®, Interflex®, LCN®, Schlage®, SimonsVoss® and Von Duprin®. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries.
For more, visit www.allegion.com.
For Media Contact Information:
Ricco Leung : email@example.com
T : +44 (0) 121 708 2466
Clare Vandaele : firstname.lastname@example.org
T : +44 (0) 121 380 2458
© Allegion plc, 2018 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland
REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370
Allegion is an equal opportunity and affirmative action employer